stage, China's booming enlarging print on their equipment and the accuracy of product and grade cigarette speaking, almost be said to have become a domestic packaging and printing industry, the highest level. Therefore, as a first impression,remy full lace wig enlarging the appearance of the product can not be the slightest flaw. In this paper, enlarging the production process of cutting edges common issues, will discuss experience and insights.

1 produces cutting edges of the reasons

in enlarging cutting process, due to various reasons,cable tray resulting in enlarging the incision on the blades produce silk, powdered or serrated like scraps of paper, color ink powder or white spots left, the industry often called cutting edges. Produce cutting edges of the main reasons are as follows:

1) improper selection of cutting blades or blades itself quality defects, defects of the blade edge curl phenomenon, resulting in significantly cutting edge of flash products.

2) installed version of the overall tone is too high pressure, steel knife edge crush.

3) After the tool is not part of local decompression, leading to a new over-voltage damage to the knife blade.

4) As the enlarging products are unique, long-period high-volume production needs, the process of making blades will have varying degrees of wear and tear,led perimeter displays then the product is barely off the press rather than the blade cut through the , in which case prone to flash.

5) the pressure is not enough, the paper has not been cut through, but in the clear edge when the paper is torn.

6) Use the moving platform at the end of a long steel knife resulting slot, rough groove serious damage to the blades easily and cause flash.

7) knife side strip hardness, highly inappropriate, or paste from the unreasonable. trolley bag Paste the hardness is too low not high enough or too far, you can not effectively compress the paper; strip hardness, paste height is too big or too close to the knife when not completely cut strips of paper was forced to pull fracture, can cause flash.

8) When the die cutter knife and steel wire on the distance is too small,best backpacks the paper strip with the indentation in the bottom film formed between the pull will cause the paper edges.

9) adaptive cutting the paper itself will lead to a certain extent, chevrolet cruze dvd the emergence of flash, such as gold and silver filaments prone to flash composite cardboard, glass, cardboard and white cards are more common powder edges; short paper fiber and low cost but prone to flash, long fiber paper is relatively small there, but the cost is higher.

10) stage, LED fluorescent tube platen die vast majority of the base model using a 18mm thick multi-layer adhesive wood. Theoretically speaking, the wood texture, uniformity, and resistance to deformation, led light power supply will be cut by the cutting blades when the flash point of the impact of the phenomenon of indirect causes.